Operating Instructions:

1.Touching ON/OFF button,you can switch on/off the RGB strip.

2.Slide the color button can adjust the same color.

3.Increasing color button can adjust the current color to the most vivid,dicreasing color button is contrary,until pure white.

4.You can adjust the brightness by dimming function,to brighten and dim the light.

5.Gradual change mode:Touch on buttom again under monochrome mode condition, RGB strip will be changed into gradual change mode .Increasing color button will speed up the color change,decreasing color button will slowdown.

6.Hopping mode:Under gradual change mode condition,touch on button,the RGB strip will be changed into hoppingmode.Increasing color button will speed up the hopping,decreasing color button will slowdown.

7.Under Gradual change or hopping mode,touching on switch will change one to the other.Close the RGB strip and restart it if you want to enter monochrome mode. 

Instruction

 Thanks for using led controller FUT-005N manufactured by Futlight.
One package includes:one controller,one remote control(without battery)
one core-end terminal,one usage instruction.
Please contact your supplier if any problems occur before you use. 

Safe instruction

Please follow the instructions to use safely.

          Attention! Operate Carefully! Please read the following tips carefully.

1, Donot install the product in areas with thundering,strong magnetic and high pressures.

2, Make sure the connection is right and firmed in case of fire accident caused by short circuit.

3,Please install the controller with ventilation to make sure the temperature is appropriate.

4,Please check whether the input voltage,power supply(constant pressure)
acord with the requirements. 

5,Please donnot connect the power before connection. 

6,Please contact the supplier when problems occur.Don’t maintain by yourself.

7,The Instruction is for this Item Only,no notification if any amendments.  

Brief introduction

FUT-005N is a multifunction Touching RGB LED Controller. It adopts the most advanced PWM reomte control 

technology ,can control all the full color LED lighting with four lines three circuits(common anode),with more than 640000 combination 

colors and 15 auto light changing modes.it widely applies 

to RGB LED strip light,LED Module,etc

Technical Parameters(remote control)

1Power supply: AAA battery * 3pcs

2Cover Material:ABS

3Fabrication processing: multicolour printing & UV varnish

Technical Parameters(controller)

1. Working voltage:DC12V/24V

2. Output control: 3 circuits(R/G/B)

3. Control current:6A/circuit

4. Connecting mathod: common anode

5. Wireless frequency:433.92MHz

6. Receiving range:20meters

Functions of Keys

1. Key 1: on/off

2. Key 2: light changing mode(15 modes)

3. Key 3:color light/white light switching mode

4. Key 4: turn up(brightness/speed)

5. Key 5: turn down(brightness/speed)

How to use

1. Press Key 1 to turn on/o